1、将机器搬到平稳的工作台， 插好电源。[Move the machine to a stable workbench and plug it in. ]

2、将加热好的烟油倒入储油桶（不超过1500ml）。[Pour the heated oil into an oil storage tank (not more than 1500ml) ]

3、打开电源开关，点击复位。[Turn on the power switch and click reset. ]

4、在注油器下方放个容器（装盛注油器排出液体），切换至调试状态，点击准备； 完成后拿掉容器。 附 视频（排气， 清洗）（在硅胶管和注油器无空气状态下不需要进行进行此操作）。[Place a container under the oiler (to hold the liquid discharged from the oiler), switch to the debug state,  click Preparation, and then remove the container when finished. With video (Air exhaust, cleaning) (this  operation is not required when the silicone tube and oiler are free of air) ]

5、点击序号（输入相应需要注油的程序序号）， 点击调出 （调出完成）， 点击自动页。[Click the archive page, click the serial number (input the corresponding sequence number of the program to be oiled), click the export (export completed), and click the auto page. ]

6、将放好产品的治具放在机器上， 切换至自动状态， 点击启动进行自动注油工作。[Place the fixture with the product in place on the machine, switch to the automatic state, and click start to carry out the automatic oil filling. ]

7、完成后更换治具再进行启动。[After completion, replace the fixture and start again. ]

8、完成生产任务后， 点击复位， 再关闭电源开关。[After completing the production task, click reset, and then turn off the power switch. ]